Sarv’s Mount Demount Tool Kit for Tubetype Commercial vehicle Tyres Specially Designed Tyre Lever to mount/Demount a Tubetype Truck tyres, provides a faster, quicker & damage free mount/demount process. Good & Sturdy tools reduce the fatigue of the operator. Mounts/Demounts in less than 2 minutes.
|* Ring Removal Tool 220914 – 1 No.
|* Ring Fitting Tool 221014 – 2 Nos.
|* Tyre Lever 220008 – 1 No.
|* Tyre Lever Crank End 220003 – 1 No.
|* Impact Bead Breaker 220124 – 1 No.
|* Valve Core Screw Driver 330002 – 1 No
Demounting Process For 2 Piece Rim
1)Insert the 600mm Tyre lever between the rim and bead to create some space between the two in order to insert rim lock tool in the following steps.
2)Place the Rim ring removal tool over the rim with its one jaws tightly secured on the rim and other jaw between the rim piece and the bead.
3)Press the lever in your direction , pulling the rim piece off the rim. Remove the ring removal tool and place it at a diff position and repeat the process.
4)Repeat the same procedure till entire rim piece is separated
Demounting Process For 3 Piece Rim
1)Insert he Tyre lever with crank end in the gap of the top most rim piece and 600 mm tyre lever between the two rim pieces
2)With the crank end end lever create some space between the two ends of the rim piece
3)Now by inserting both the levers between the two rim pieces keep pushing the rim piece out.
4)Keep repeating till the rim piece is fully detached. The simply take first rim piece out with the help of hands
5)Now its time to remove the second rim piece .Tyre is demounted.
Mounting Process For 2 Piece Rim.
1)Insert the tyre valve inside the rim and set the tyre on the rim
STEP 2 : Place the rim piece over the rim.
STEP 3 : Push the rim piece on the rim to seat it over it. Position the tools in the hands to be used in the next step.
4)Press the first Rim Ring fitting tool (by securing it inside rim hole) against the rim piece to seat it.
5)Keeping the first tool in position, press the second Rim Ring fitting tool (by securing it inside rim hole) against the rim piece to seat it.
Keep pressing the second tool against the rim piece till it is securely set.
Mounting Process For 3 Piece Rim
1)Place the rim pieces over the rim.
2)Push the rim pieces on the rim. Position the tools in the hands to be used in the next step.
3)Press the first Rim Ring fitting tool (by securing it inside rim hole) against the rim piece to seat it. Repeat the process for second tool. Keep pressing the tools till the rim pieces are mounted.
To order your Manual Mount Demount Tool Kit for Tubetype Commercial Vehicle Tyres or to enquire about other SARV tools & Automotive Service Workshop Equipment from our complete range, write to us at firstname.lastname@example.org or visit our ONLINE STORE at www.garageequipments.com